Natural HF Melt and Pour Soap Base
1 review(s) | 2 out of 5
Availability: In Stock

Natural HF Melt and Pour Soap Base

SKU: 38002

Vegetable based, melt and pour soap base, made from natural ingredients and free from any Surfactants or MPG. Produces natural translucent soap bars.

Product Characteristics:

  • Vegetable based
  • Contains no surfactants or mono propylene glycol
  • Glycerine Rich
  • No parabens
  • No phenoxyethanol
  • No Sulfates
  • PEG Free
  • No Propylene Glycol
  • Made from 100% Natural Ingredients
  • Good moisturizing from a very high glycerin content which provides a pleasant skin feel
  • Superior color stability even if kept at a high temperature for extended periods
  • Neutral odor provides excellent fragrance lift
  • Suitable for slicing or molding
INCI List:
  • Glycerin
  • Aqua
  • Sorbitol
  • Sodium Palm Kernelate
  • Sodium Stearate
  • Sodium Oleate
  • Sodium Chloride
  • Citric Acid
  • Sodium Citrate
  • Pentasodium Pentetate
  • Tetrasodium Etidronate

For quantities of 250lbs and higher, we will contact you with a shipping quote prior to processing your order.

Starting At: $5.48
Select Quantity
- +
M&P Natural HF Soap 2lbs ($2.74 /lb) ( $5.48 )
- +
M&P Natural HF Soap 24lbs (12x2lbs) ($2.56 /lb) ( $61.44 )
- +
M&P Natural HF Soap 25lbs ($2.10 /lb) ( $52.50 ) (Out of Stock)
- +
M&P Natural HF Soap 50lbs ($2.04 /lb) ( $102.00 ) (Out of Stock)
- +
M&P Natural HF Soap 250lbs ($2.02 /lb) ( $505.00 ) (Out of Stock)
- +
M&P Natural HF Soap 500lbs ($1.98 /lb) ( $990.00 ) (Out of Stock)
- +
M&P Natural HF Soap 1000lbs (1.94 /lb) ( $1,940.00 ) (Out of Stock)
- +
M&P Natural HF Soap 1800lbs (1.86 /lb) ( $3,348.00 ) (Out of Stock)
Base Price: 5.48
Selected Options: $0.00
Total Price: $5.48
Instructions for handling, molding and processing the Melt and Pour Soap base:

There are two ways to melt the soap base:
  • Microwave oven
  • A jacketed hot water bath ideally with thermostatic control (like the soup small heating kettles in restaurants.)

Note: For simplicity you can use a double boiler pan with hot water in between. Instructions for double boiler are similar to microwave.

Microwave Instructions
  1. Thinly slice or grate the soap base for ease of melting.
  2. Place the soap in a Pyrex cup and place it in the microwave for 30 seconds (For half a pound)
  3. Remove and stir slightly.
  4. Continue to microwave for another 30 seconds.
  5. Add soap colorant and stir until blended (soap colorant should be minimal).
  6. Add soap fragrance to the desired level, and stir gently and thoroughly
  7. Pour soap into soap molds. Let cool and harden before popping out of the moulds.
  8. For fast set allows the soap to cool for 10 minutes, then cover in plastic wrap and place in refrigerator (not the Freezer) until set.
  9. Wipe and clean the microwave.

Things to beware and ensure in processing the Melt and Pour Soap base:
  1. Never allow the soap to boil. Boiling might denature the color and cause a yellowish hue.
  2. Children require adult supervision, and should not handle alone the hot and melted soap.
  3. Ideally the soap temp. Prior to pouring should be between 55-60 Celsius. In other words you can put your finger in the soap and it shouldn't burn.
  4. Do not over stir when mixing colors and fragrances. But if this happens allow 10 minutes of settling for the release of air bubbles. Air bubbles if tapped in the mould will spoil the transparency
  5. Always pour on a leveled surface.
  6. When placing an insert or an object in the soap. Pour the first layer and let cool. Insert the object. And when pouring the second layer it has to be higher in temperature up to 70 degrees Celsius. Otherwise separation of the two layers might occur.
  7. Avoid diluting the soap with water or any other chemical. The only exception to this is to add a maximum of 5% glycerin should you need a softer or more transparent soap.
  8. Avoid contact of soap with eyes.

Note: This information contained herein is offered only as a guide to the handling of this specific material and had been prepared in good faith by technically knowledgeable personnel. It is not intended to be all-inclusive and the manner, conditions and handling may involve other and additional considerations. No warranty of any kind is given or implied and The Chemistry Inc. will not be liable for any damages, losses, injuries or consequential damages which may result from the use or reliance on any information contained herein. 
All Categories