Body Wash or Shampoo
Ingredients—Ingredients should be added
in the following order:
for specific amounts to be added)
1. Liquid Crystal
between additions (See manufacturing tips)
(See manufacturing tips)
wish to add a Conditioning Additive, color
or Q-Pearl, this is the time
to add them.
Once your additives are fully mixed, it is time to add the
salt to thicken the formula.
should be added to the amount shown in the table above. (As required)
Adjust pH if
required (See manufacturing tips)
To add salt as a solution, dissolve 1 part salt to 2 parts hot water.
Parts are determined by weight, (example: 1oz/28 gm salt to 2oz/56gm
water. Add this mixture a little at a time to increase viscosity. Trials
will be needed to establish the correct amount to add. Normal usage levels
are 5-6% of the total formulation weight
* Do not add too much salt solution or
the product will go cloudy!
Liquid Crystal Concentrate is
not designed to be used undiluted. It should be diluted as per our
guidelines; otherwise in its undiluted form it may cause skin
To create bubble
bath, simply add an additional portion of water, (32oz for the 50oz batch
or 64oz to the 100oz batch) and stir to mix completely. Then add an
additional portion of salt, (28gm for the 50oz batch or 56gm for the 100oz
batch) and stir to thicken.
Concentrate is not designed to be used undiluted. It should be
diluted as per our guidelines; otherwise in its undiluted form it may
cause skin irritation